clamptite高級卡箍式工具箱CLT01K 美國廠商安排出庫
Clamp Anything...Any Size, Any Shape, Any Where!!!!

No matter if you’re looking for a quick and effective emergency leak repair or a bullet proof means for securing nearly any material from fuel lines, radiator hoses to header wraps.  This innovative tool is a must have addition to any shop or tool chest.  ClampTite quickly replaces ineffective or damaged conventional hose clamps with a temporary or permanent clamping mechanism formed from stainless steel safety wire.
This tool is machined stainless steel with a one piece body and nose and bronze nut. The tool was designed with the detailed craftsman who needs a long lasting tool able to hold up to extremely tough wire while clamping, binding and pulling the wire until the job is complete.
The Mini is an all Stainless steel tool with an Aluma-Bronze nut.  It has the same mechanical advantage as the Premium CLT01 tool but is half the size.  It will fit in those hard to reach places or tight spaces. It also has an encapsulated nut for ease of use. 
詳情描述：

卡箍式管接頭價格,煤礦卡箍式管接頭,抽瓦斯卡箍式管接頭,卡箍式管接頭

1產品名稱：卡箍式柔性伸縮接頭
1.2執行標準：GB8259—87

1.3構造與材質：卡箍式伸縮接頭由卡箍、密封圈、限位環及螺栓組成。

①卡箍：球墨鑄鐵、材質QT40—18或QT42—10

②密封圈：天然橡膠或合成橡膠

③限位環：A3鋼

④螺栓：碳鋼或不銹鋼

1.4技術要求：①公稱壓力（Mpa）：0.6Mpa—6.4Mpa

②適用溫度：-20℃~+230℃

1.1型號：KRH型K—卡箍    R—柔性    H—環型 
傳統的金屬管道連接有三種方式：焊接、法蘭連接和螺紋連接，抽瓦斯卡箍式管接頭，卡箍連接為管道連接提供了第四種連接方式。它是一種更為快速、方便和經濟的管道連接方式，在安裝過程中不會給管道帶來任何污染。卡箍連接是在管道的外壁上加工一個溝槽，然后使用卡箍將兩段管道連接在一起。溝槽的加工方式用切制和滾制兩種。   
Since the Mini can handle wire size up to .041" it is a great companion to the Premium CLT01 tool or by itself.  This is a ClampTite, LLC exclusive.  

The Premium tool can handle wire sizes up to .062" including sizes .032", .041" and .051".  The tool is designed to handle that size wire because the body is bullet proof and the wire will fit into the notch.  In emergencies customers have used a coat hanger.
Photo courtesy of Johnson's Hot Rod Shop.
clamptite高級卡箍式工具箱CLT01K 美國廠商安排出庫